Home > Dash Panels Original Eqpt >

Reproduction Panel accessory panel - Trim Tabs -Surround for Bennett Switch
P1230724


 
Our Price: $25.50

Product Code: FP-PANELMINITRIMTABBENNETT


color*:
Black Stardust
Cherry Burl

 
Description
 
Reproduction Instrument and Switch Panel Set for Sea Ray

  • Unique manufacturing process produces a UV stable, high gloss panel that will not fade like the originals
  • The woodgrain is protected by a crystal clear layer of acrylic which is FAR SUPERIOR to the traditional method of engraving the woodgrain and then spraying a clearcoat on top to "protect" it. Our panels have a very deep look and are the finest on the market.
  • Please view the alternate photos which show the depth and gloss. The panels are photographed with a protective clear film installed so the main reference photos do not show the gloss of the panel.
  • All engraved text is translucent and will illuminate with your existing backlighting. We also sell flat 110VAC light strips which can be wired to your existing system.
    http://www.searay-parts.com/Indicator-dash-light-s/126.htm
  • Panels have been designed to accept your existing gauges and switches.
  • VARIATIONS: - Please see below for an explanation of the variations in these panel sets.
  • You may drill and cut this material if you wish to add holes or electronics. We enclose detailed instructions with every set.
  • All panels are pre-drilled for #8 tap screws . Black stainless steel replacement screws ARE included with your panel set. PLEASE NOTE: The screw holes may or may not match your existing screw locations. It is typically better to drill new holes in the fiberglass for a fresh installation. If the screw holes match your existing holes, you may need to fill the existing holes with epoxy and drill a new pilot hole for a secure installation. Normal hardware store epoxy will do the job.
  • Most panels are IN STOCK and ready to ship.

VARIATIONS:

Switch panel - This is a surround plate for the Bennett Trim Tab switches. You will still utilize the entire Bennett assembly

Dimensions: 3.5" x 3.3" (83.85mm x 89.75mm)




Browse for more products in the same category as this item:

Dash Panels Original Eqpt
Dash Panels Reproduction