Home > Electrical >

LT-2581-5 Carling (ON)/OFF/(ON) Momentary Double Pole Red/Black lighted tip toggle switch Independent lamp LT-2581-5
LT-2581-5


 
Our Price: $30.65

Product Code: LT-2581-5

Description
 
Carling Switch (ON)/OFF/(ON) Momentary Double Pole, lighted tip toggle switch.
  • Independent Red lamp with black handle. An independent lamp has both a positive and negative terminal as opposed to the standard switches that just have a negative terminal. Independent lamps can be lit independently of the handle position as opposed to standard "dependent" lamps that get their power internally when the handle moves to the "on" position.
  • 8 terminal; The two terminals marked "F" at the top middle and bottom middle positions are for the lamp, The center terminals on the left and right are power in, The upper left terminal and the upper right terminal are MOMENTARY power out with the handle in the down position, the two terminals are independent of each other. The lower left terminal and the lower right terminal are MOMENTARY power out with the handle in the up position, the two terminals are independent of each other.
  • Switch is normally OFF. The handle is spring loaded and will return to the OFF position after releasing from the up or down momentary positions.
  • Lamp is 12VDC.
  • Common for Marine, RV, automotive, and other 12 volt DC applications. Typically used for trim tabs, linear actuators on hatch lifts, electric seats, window vents. Also used for two way air horns or dual horns, electric windows or other small motors. Can be used in conjunction with solenoids on larger motors like a windlass, or heavier application.
  • Part # LT-2581-5.
  • For instructional videos, please visit our YouTube channel:

    www.youtube.com/fpmarine

Accessories for this product...
3M Part # 772-250-NB-A. Male-Female Quick Disconnect. Wire Gauge 16-14 AWG, Tab Width 6.35mm - 0.25", Tab Thickness 0.81mm Molex Part # 19164-0050. Perma-Seal Female Quick Disconnect. Wire Gauge 22-18 AWG. Tab Width 6.35mm - 0.25". Tab Thickness 0.81mm Carling Toggle Switch Plastic Multi-Tool Large "Cone" dressnut for Carling Lighted Tip toggle switches. Sea Ray Part # 2302552
Our Price: $0.25

Add
Our Price: $0.46

Add
Our Price: $3.68

Add
Our Price: $2.18

Add
3M Part # 772-250-NB-A. Male-Female Quick Disconnect. Wire Gauge 16-14 AWG, Tab Width 6.35mm - 0.25", Tab Thickness 0.81mm Molex Part # 19164-0050. Perma-Seal Female Quick Disconnect. Wire Gauge 22-18 AWG. Tab Width 6.35mm - 0.25". Tab Thickness 0.81mm P1360724 LT cone nut
Molex Part # 19019-0031. Female Quick Disconnect. Wire Gauge 16-14 AWG. Tab Width 6.35mm - 0.25". Tab Thickness 0.81mm Carling protective rubber boot for lighted tip toggle switches 1701291 Dress facenut for Carling lighted tip toggle switches. Sea Ray Part # 1787018 Dress washer for Carling lighted tip toggle switches. Sea Ray Part # 1737371
Our Price: $0.11

Add
Our Price: $1.90

Add
Our Price: $1.05

Add
Our Price: $0.52

Add
Molex Part # 19019-0031. Female Quick Disconnect. Wire Gauge 16-14 AWG. Tab Width 6.35mm - 0.25". Tab Thickness 0.81mm LT-rubber boot LT face nut LT washer

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Electrical
Electrical > Switches > Lighted tip toggle switches
Electrical > Switches > Lighted tip toggle switches > (ON)/OFF/(ON) momentary switches
Electrical > Switches