Home > Dash Panels >

EIM Replacement System 290 310 330 350 Sundancer

Alternative Views:

Our Price: $3,700.00

Product Code: SR-PANEL-EIM-290-350-EYEBROW

Vessel Description

EIM Replacement System - Eyebrow

We have developed replacement panels and a full wiring harness which converts your boat to reliable Carling switches. All components are traditional top quality robust marine components that are easy to obtain and easy to service in the field.


We have posted videos on our Youtube Channel, Please visit www.YouTube.com/fpmarine
Our kit includes a new circuit breaker box that is pre-wired to the new switch panels. You will have to disconnect the main power and ground feeds from your old Forward EIM and transfer it to the new circuit breaker box. Instructions are included.

The aft EIM box will be replaced by a similar sized box which contains some connection devices and relays. You simply disconnect the 40 pin plug, power feeds and ground lead, then connect them to our new box and 40 pin harness plug.

It will be necessary to cut some fiberglass to accept the new switch panels and you will have to run the new harness and secure the wires.

This kit will retrofit 290 Sundancer, 310 Sundancer, some 330 Sundancers, and some 350 Sundancers and some other models with the "EYEBROW shaped" EIM touchpads/EIM system. 1797300 1797304 1810628 1810629 1810630 1970606 1940087 1940065. This will replace additional part numbers.

We offer a 1 year warranty on the components. We will supply replacement components that fail due to manufacturers defects for a period of 1 year from date of purchase. Warranty does not include labor.

We have had tremendous feedback:

"Techs usually come in my office to complain about stuff, not to tell me how well thought out and properly executed someone’s product is. Caught me off-guard. Thanks for that". Tidewater Yacht Service, Baltimore

I just wanted to let you know that the install went well. I now have working switches again. The install instructions were straight forward. I had to remove about a 2”x2” from the fiberglass to make the switches on the right side fit. I also used my previous ignition.

Thank you for all of your help."

290 Sundancer -(Customer installation) -

Thank you for all your help, my brother and I finally figured out the problem. Everything is working and I am so relieved I can enjoy my boat again. The replacement product is very well designed, thanks again.


I called FP Marine Monday morning and asked questions about your EIM replacement for my 2003 SeaRay 200BR you gave me all info so I ordered your system and received it Wed. It looked very professional and included all hardware and directions. It was about 2hrs to install and worked perfect. I would recommend your system to any sea ray owner to replace a very bad EIM system, sea ray should have installed your system to start with. Thanks FP Marine. Randy

290 Sundancer

Hi Ed , this has been the best replacement I have ever did on anything! Everything was just plug and play! The only modification I needed to do is cut bigger hole in the side cavity to push harness through. The new replacement looks much better then original! Thank you for building this with such a quality!

Thank you again! Dmitri


Everything went well with the install, I believe the customer will be very happy. If you have any further questions please feel free to give me a call at 770-720-2922. Thanks


Recently I purchased and installed myself, the EIM replacement system for my 2007 Sea Ray 320 Sundancer. I am very pleased with the quality and looks of the new toggle/rocker switches; what a big improvement over the original switches. Initially when I saw the new replacement wiring harness, it looked very complicated but actually turned out to be fairly simple to install. Everything matched up perfectly, adjustments had to be made to the dash to make the new switches fit but the templates made that easy. I would highly recommend this product to anyone who is having trouble with their switches like I did. Now everything works like it is supposed to and they look great. Everyone that I spoke to at FP Marine were very helpful with the questions I had. Thank you so much for developing this product and making my boating more enjoyable.

Thanks again, Marty


I have attached several photos of the completed project. The sun didn't cooperate and I will try to get better shots next week.

Note that the dash is not perfectly flat at these locations so I didn't crank down on the bottom screws. The plates flex slightly in this installation.

It is a very straight forward installation but takes a little effort due to access and cutting the holes. You remove the access panel in the storage area behind the dash to get access to the wiring. Cutting the holes would probably be best done with a Dremel tool and blade for fiberglass. I used several different tools. The actual wire harness connections are straight forward and very easy to complete. It does take a few hours due to the required hole cutting.

Looks fantastic when complete and works great! Love the back light on the symbols. I didn't expect that.

On another issue, do you make replacement dash panels for the 220SD. I could send you my old dash panel as a template. I would need a slight modification in the standard hole templates since I use 3 large gauges (standard is 2) and 1 fewer small gauge.



WE have modified the size of the panels since this feedback

Please also visit, join, and search www.clubsearay.com for more EIM testimonials, step by step installation ideas, and thousands of Sea Ray owners sharing ideas


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 March 22, 2021
Reviewer: Jamal diesel from Hammonton, NJ United States  
All I can say is finally someone designed a awesome product to replace sea ray  product that left a lot of people in the cold.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Purchase December 28, 2020
Reviewer: Otis Gilyard from Palm Coast, FL United States  
Very knowledgeable and fast shipping on product. Ordered on a Thursday delivered the following Wednesday during the holiday rush. Thank you FP!!

Was this review helpful to you?

Browse for more products in the same category as this item:

Dash Panels
Electrical > Accessories
Electrical > Electrical SR
Electrical > Fuses
Electrical > Misc electrical
Electrical > Panel assemblies
Electrical > Panels, Switch/Gauge - blank