Home > Electrical >

VAD1-2Carling ON/OFF double pole rocker switch w/red and green lamps. VAD1-2

Our Price: $19.86

Product Code: VAD1-2

Carlingswitch ON/OFF double pole V series Contura rocker switch body.
  • ON/OFF configuration
  • The double pole switch is most often used to operate two separate lights, pumps, bilge blowers, etc. Wellcraft uses this switch
  • 12V green independent lamp in the #1 (top) position is wired to terminals #7 and #8 and illuminates independently of actuator position.
  • 12V Red dependent lamp in #2 (bottom) position is wired to terminals #3 and #7. The red lamp in position 2 illuminates when the switch is actuated to the ON position.
  • An independent lamp has both a positive and negative terminal as opposed to the standard switches that just have a negative terminal. Independent lamps can be lit independently of the actuator position as opposed to standard "dependent" lamps that get their power internally when the actuator moves to the "on" position
  • 6 terminal; Top right terminal (#7) is the ground for the lamps, Top left terminal (#8) is the power feed for the green independent lamp. The middle two terminals #2 and #5 are power in. The bottom two terminals #3 and #6 are power out. The two sides of the switch are independent of each other.
  • Terminals #1 and #4 are not present in this particular switch. See our link to the reference page below if you need assistance in identifying terminal locations.
  • Common for Marine, RV, automotive, and other 12V DC applications.
  • Choose from a variety of actuators with different lenses. Actuator part numbers begin with VV

For instructional videos, please visit our YouTube channel:


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Electrical > Switches > Carling rocker switch bodies and Acc. > ON/OFF switch bodies
Electrical > Switches
Electrical > Switches > Carling rocker switch bodies and Acc.