www.searay-parts.com

IN STOCK SPECIAL - Color: Oyster White for Cobia Boats built by Maverick Boat Company. It is a little darker than our standard off-white color. Mounting holes are pre-drilled around the flange.

• Thermoformed Plastic with shiny acrylic surface. UV stable, easy to clean, technologically superior to plastics from a decade ago.
  
• Rod inserts have holes and grommets at either end or both ends. Holes on the "right" side would be drilled to the right if you are facing an installed rod box.
  
• "Tapered" means the depth varies from the top to the bottom to compensate for the outer hull sides.
• Measurements below are outside dimensions. The flange is typically 1" -1-1/2" so subtract 2" - 3" from the outside dimensions to get the approximate cutout size.
  54-3/4" Width x 15-3/4" Height x 5" depth at top x 4" depth at bottom.
• Part # 10003/4 - Cobia Part# 530541 (holes on the left), Cobia part# 530540 (holes on the right)
  
• Installation - Outside flange can be drilled easily, or unit can be installed in a tight-tolerance cutout hole with adhesive caulking for a clean look.