Plastic fishing Rod Insert
IN STOCK SPECIAL - Color: Bone (Carolina Skiff) - Unfinished box, no rod holes, no grommets, No restraint cords. This is a "Blank" plastic insert with no hardware. It may have minor scratches, but no physical damage. The information below is for our new, 1st quality boxes but left in this listing for reference purposes.
- Thermoformed Plastic with shiny acrylic surface. UV stable, easy to
clean, technologically superior to plastics from a decade ago.
- Rod inserts have holes and grommets
at either end or both ends. Holes on the "right" side would be drilled to the right if you are facing an installed rod box.
- "Tapered" means the depth
varies from the top to the bottom to compensate for the outer hull
sides.
- Measurements below are outside
dimensions. The flange is typically 1" -1-1/2" so subtract
2" - 3" from the outside dimensions to get the approximate
cutout size.
49-1/2" W x 18-1/2" H x
5" depth at top x 3-3/4" depth at bottom.
- Part # Bone rod box
- Installation - Outside flange can be drilled easily, or
unit can be installed in a tight-tolerance cutout hole with adhesive
caulking for a clean look.
