 |
 |
 |
|
Acrylic sheet material
- Spartech Cell cast Acrylic, similar to Plexiglas brand. This is the most commonly used acrylic material in the marine industry.
- Clear
- Great for cabinet doors, access panels, switch panels, chart covers, windows, portlights, shape it into small scraping tools, signs, placards, etc, etc. This material can also be painted with durable results.
- 19-1/2" across top, 23-3/4" across bottom" x 25" top to bottom x 3/16" thick. There are holes drilled around the perimeter.
- Can be cut and shaped and drilled with common tools. Best cut with a 40t carbide tip circular saw blade or normal router bits. Jigsaws work well also. Regular drill bits work well, but special steep point drill bits for plastics work the best to prevent chipping on the backside where the bit exits the material. Water sanding and buffing easily removes scratches. Can be heated and bent. Edges can be sanded and buffed for a perfect finish.
- DO NOT use petroleum based solvents like lacquer thinner, paint thinner, or acetone for cleaning
|
|
|
 |
|
 |
|
|
|
